SPELABReviews of spelabautoparts.com

Write a review Website

The Fair Hearing score

4.2/ 5

Great

806 reviews

SPELAB4.2Great

Write a review

Rating distribution

Select a line to read only those reviews.

What customers rate

Honesty, pricing, process and quality scores appear once 5 customers have rated them.

About SPELAB

SPELAB Auto Parts - High Performance Car Replacement Parts, Aftermarket Auto Parts & Accessories

SPELAB (spelabautoparts.com) has 806 customer reviews on The Fair Hearing, with an average rating of 4.2 out of 5.

Also known as: spelabautoparts.com
Website: spelabautoparts.com
Category: Auto Parts & Wheels
Listed on The Fair Hearing: 2026

More in Auto Parts & Wheels

Write a review

May 21, 2026

Good kit, but needs some tweaks

The EGR delete kit I received looked good. Upon installing, the coolant pipe was pre-installed, so I checked with a test fit of the intake manifold to check alignment with the oil cooler on the coolant connection. The installed pipe was not in the correct orientation. I had to turn it approximately 10°, and as such, the kits coolant stainless steel tubing needed to be cut approximately 1/2". The coolant hose provided, though it fit the stainless steel tubing on the kit perfectly, it was too large for the oil cooler connection. A hose clamp would have had to really collapse a lot of hose to make it snug, potential leak. The supplied hose clamps in my experience were not up to the task, so I swapped in some heavy duty hose clamps, and had some 3/4" heater hose to replace the supplied hose. The heater hose fit tight on the stainless steel tubing and on the oil cooler connection. Once installed, it has been fine, no leaks. So my critique is to review where the stainless steel tubing lines up to be in harmony with the oil cooler connection. Also, to cut 1/2" off the stainless steel tubing, use a quality 3/4" heater hose and ditch the hose clamps, and use heavy duty hose clamps. Rest of the kit was fine, the up pipe block off, and the supplied o - ring for the main body to the intake manifold fit well. In reflection, a Viton o - ring may be a better choice. To replace it if it leaked, requires pulling the turbocharger and then the intake manifold to access the coolant connection into the intake manifold.

By Steve J.

Response from SPELAB· May 22, 2026

Hello Steve, Thank you for your thorough review and for sharing your installation experience with the EGR delete kit. We truly appreciate your constructive feedback, as it helps us improve our product. We’re glad to hear that the rest of the kit—such as the up pipe block off and the main body o-ring—fit well. However, we’re sorry to hear about the alignment issue with the coolant pipe and the fitment problem with the supplied coolant hose and clamps. We also forward your suggestion to our related department. Thank you again for your honest critique and for taking the time to help us improve. We’re glad to hear that after your modifications, the kit is working well with no leaks. If there’s anything we can assist you with in the future, please don’t hesitate to reach out. Best Regards, Mina spelabautopart Customer Support [email protected]

SPELAB reviews

Showing 57 reviews with 4 stars · Clear filters

Jul 24, 2026
Well I bought a ccv recirculating box…
Well I bought a ccv recirculating box from you guys and it's a great design only problem is that whenever I'm idling and at temp it tends to puff out white smoke out of my exhaust, is there a way to fix that on the box or what can I do?
By Bryce N.
Response from SPELAB· Jul 27, 2026
Dear Customer, Thanks for your feedback on our CCV recirculating box. This recirculation unit does not have adjustable internals to eliminate idle white smoke. The smoke originates from crankcase blow-by vapors fed back into the intake. Check for pinched hoses and confirm the internal separator is fitted properly. If the issue remains, pairing it with an external catch can helps condense vapors and reduce smoking. Let us know your engine model if you need extra technical guidance. Best regards, spelabautopart Customer Support Team [email protected]
Jul 20, 2026
I would have gave a 5 star but there…
I would have gave a 5 star but there are no instructions or pictures to go by. Thankfully there are people on YouTube that have done this install before. Product is made very well. Wish the hose was longer. I do recommend this product and is very well like I said.
By Mark C.
Response from SPELAB· Jul 21, 2026
Dear Customer， Thanks for your honest feedback! We’re sorry there were no installation guides included. We will update our manuals and look into extending the hose length based on your suggestion. Glad you love the build quality and recommend our product! Best regards, spelabautopart Customer Support Team [email protected]
Jun 22, 2026
Took over a week to get all the parts
Took over a week to get all the parts, cut up videos on how to, suck. If I wasnt a mechanic Id have real trouble trying to figure out all this.
By David A.
Response from SPELAB· Jun 24, 2026
Hello David, We apologize for the delayed shipping and the poor quality of our installation videos. We completely agree that they should be easier to follow for non-mechanics, and we're currently updating them to be more detailed and user-friendly. If you need any installation assistance, please reach out to our support team—we'd be happy to help personally. Thank you for your feedback—it helps us improve. Best Regards, Mina spelabautopart Customer Support [email protected]
Jun 11, 2026
It seems to be a good quality product
It seems to be a good quality product. All parts fit well except for the supplied fuel line. I had to put the fuel line in which fit but then the air intake manifold did not quite fit in its proper place. I had to physically bend the fuel line to make the air intake manifold fit. The first Bend from the engine block is about a quarter inch out too far and should be bent a quarter inch closer to the block. With all that, everything fits and works properly.
By Daniel J.
Response from SPELAB· Jun 12, 2026
Dear Customer, Really appreciate your genuine review and detailed installation notes! We’re happy our product meets your quality expectation, and sorry the fuel line didn’t have the ideal bending angle and forced you to adjust it manually. Your professional suggestion about shifting the bend 1/4 inch toward the engine block is super helpful for us to improve production. Glad all parts fit and function well after your modification. Don’t hesitate to reach out if you need any help in the future! Best Regards, Scarlett spelabautopart Customer Support [email protected]
May 28, 2026
Customer service
Customer service was good and the parts were good quality.
By Kaleb S.
Response from SPELAB· May 29, 2026
Dear Customer， Thank you for your feedback! We're glad you're satisfied with our service and product quality. Looking forward to serving you again soon! Best Regards, Scarlett spelabautopart Customer Support [email protected]
May 23, 2026
I bought a dpf delete kit for my 2019…
Had an issue with parts but they were able to take care of it in a timely matter.
By josh H.
Response from SPELAB· May 26, 2026
Dear Customer, We sincerely apologize for the inconvenience and confusion this has caused you. We fully understand your frustration regarding the missing CAN plug kit. After checking your order and product details, we acknowledge the communication gap on our end. We’re truly sorry the kit did not include the necessary part your vehicle requires for normal operation. We’d like to make this right. Please let us know what we can do to resolve this issue for you, and we will follow up promptly. Thank you for your honest feedback, which helps us improve our products and service. Best Regards, Scarlett spelabautopart Customer Support [email protected]
May 21, 2026
Good kit, but needs some tweaks
The EGR delete kit I received looked good. Upon installing, the coolant pipe was pre-installed, so I checked with a test fit of the intake manifold to check alignment with the oil cooler on the coolant connection. The installed pipe was not in the correct orientation. I had to turn it approximately 10°, and as such, the kits coolant stainless steel tubing needed to be cut approximately 1/2". The coolant hose provided, though it fit the stainless steel tubing on the kit perfectly, it was too large for the oil cooler connection. A hose clamp would have had to really collapse a lot of hose to make it snug, potential leak. The supplied hose clamps in my experience were not up to the task, so I swapped in some heavy duty hose clamps, and had some 3/4" heater hose to replace the supplied hose. The heater hose fit tight on the stainless steel tubing and on the oil cooler connection. Once installed, it has been fine, no leaks. So my critique is to review where the stainless steel tubing lines up to be in harmony with the oil cooler connection. Also, to cut 1/2" off the stainless steel tubing, use a quality 3/4" heater hose and ditch the hose clamps, and use heavy duty hose clamps. Rest of the kit was fine, the up pipe block off, and the supplied o - ring for the main body to the intake manifold fit well. In reflection, a Viton o - ring may be a better choice. To replace it if it leaked, requires pulling the turbocharger and then the intake manifold to access the coolant connection into the intake manifold.
By Steve J.
Response from SPELAB· May 22, 2026
Hello Steve, Thank you for your thorough review and for sharing your installation experience with the EGR delete kit. We truly appreciate your constructive feedback, as it helps us improve our product. We’re glad to hear that the rest of the kit—such as the up pipe block off and the main body o-ring—fit well. However, we’re sorry to hear about the alignment issue with the coolant pipe and the fitment problem with the supplied coolant hose and clamps. We also forward your suggestion to our related department. Thank you again for your honest critique and for taking the time to help us improve. We’re glad to hear that after your modifications, the kit is working well with no leaks. If there’s anything we can assist you with in the future, please don’t hesitate to reach out. Best Regards, Mina spelabautopart Customer Support [email protected]
May 18, 2026
6.7 powerstroke full T/D
I’ve installed the ccv relocation on my 6.7 powerstroke and the egr delete and full 5 inch exhaust on my truck myself super easy and straight forward. Also installed the ez link tunes in minutes. Only reason I did not give 4 stars is I’m still waiting on my 5 position switch. Also you don’t get stickers when you spend $2,300 that’s disappointing.
By Michael S.
Response from SPELAB· May 18, 2026
Dear Customer, We sincerely appreciate you taking the time to share such a detailed account of your installation experience with us. We are delighted to learn that all the components—including the CCV reroute kit, EGR delete kit, 5-inch exhaust system, and EZ Link tuning program—were not only incredibly easy to install but also fit your 6.7 Powerstroke engine perfectly. We sincerely apologize for the delay in shipping your 5-position switch and for the oversight regarding the missing stickers. We fully understand the disappointment this may have caused you. We will take steps to ensure that this does not happen again. For your next order, simply leave a note requesting the stickers, and our customer service team will be happy to include them as a complimentary gift. Thank you once again for your loyal support; we remain committed to continuously improving the quality of our service. Best Regards, Scarlett spelabautopart Customer Support [email protected]

SPELABReviews of spelabautoparts.com

Rating distribution

What customers rate

About SPELAB

More in Auto Parts & Wheels

The Rust Farmers

Bimmer America LLC

Glass America | Windshield Repair & Replacement

Improved Racing

SPELABReviews of spelabautoparts.com

Rating distribution

What customers rate

SPELAB reviews

Well I bought a ccv recirculating box…

I would have gave a 5 star but there…

Took over a week to get all the parts

It seems to be a good quality product

Customer service

I bought a dpf delete kit for my 2019…

Good kit, but needs some tweaks

6.7 powerstroke full T/D

About SPELAB

More in Auto Parts & Wheels

The Rust Farmers

Bimmer America LLC

Glass America | Windshield Repair & Replacement

Improved Racing

SPELAB reviews

Well I bought a ccv recirculating box…

I would have gave a 5 star but there…

Took over a week to get all the parts

It seems to be a good quality product

Customer service

I bought a dpf delete kit for my 2019…

Good kit, but needs some tweaks

6.7 powerstroke full T/D