EMP.PartsReviews of emp.parts

I bought the HDPE front splitter and rear diffuser for the S650 Mustang. The front splitter install was easy and straight forward however I was missing some hardware or got sent the wrong hardware. The stock bolts were not long enough to go back in the front on the bottom so I had to go buy some different screws. They did not send screws long enough to go through the four slotted holes in the middle, needed to go get longer ones for that too. The holes weren't drilled for the winglets so I had to drill those. I did not have enough of the short allen head bolts to put everything on so I had to cut some of the longer ones down to size. The rear diffuser was very easy to install however in my opinion it is flimsy, I am going to come up with a way to reinforce it because I do love the way these look on my car. The look absolutely amazing and they really set my car off.

This kit is absolutely fantastic opposed to an open back of the car. The carpet backed kit keeps the sound in the trunk out of the cabin so you can have a conversation and helps your car stay cooler by separating the cabin from the trunk. If you are considering this in anything you daily drive or are going to track on the weekend the carpet facing the trunk kit is good to go easy to install and fits up almost perfect. You don't need to worry about how strong this kit is I was kneeling on it installing the kit myself and I'm about 240lbs it's plenty strong to hold track spares or a jack.

I’ve only brought in the packages and opened the wings from the box and the splitters and diffusers are still wrapped. Product looks well designed and powder coated. My only concern is the weight of the “aluminum” you used. It seems very unnecessarily heavy for its purpose and compared to other sheet aluminum alternatives available; and when you consider the weight of the composites you use and the featherweight of the carbon fiber used elsewhere. I’m a little concerned how long this will hold up with self tapping screws in soft plastic?-(. Car is being built now; we’ll see?-)

I feel this is a great kit. Although it is a little difficult to install with a roll cage already in place. This is no fault of theirs. Other than that this installation was super easy, straight forward and is a lot more solid than one would think. Great product only improvement possibly would be to make the spacers one solid piece.

I like the product

Very nice part with an extremely easy install. Only thing I don’t like is the bottom of the seat delete has some marks on it that make it look like it’s not brand new. It’s not bad enough to exchange though.

Great customer service. Paint is exceptional, however fit was off. Only 1 bolt is able to be secured.

The front splitter looks great on the car. I didn't give the part a 5 star because the following. I was not able to screw in 3 screws on each side piece because they did not line up with the plastic no matter how I adjusted the splitter. I believe this is due to me having a non-performance pack 2019 Mustang GT. I originally asked EMP if there would be any issues with putting the part on my specific model and they replied, "no". Turns out the part works better on Performance pack cars where the belly pan connects to the front bumper. On the non-performance pack mustangs there is a slight gap between the bottom of the front bumper and the belly pan. The chin splitter still seems to be held on good enough but I will see over time.